
Drying Heat Pump
Brand :AIM
Product origin :China
Delivery time :20 days after payment
Supply capacity :5000units/month
AIM heat pump drying room performance characteristics:
1), easy installation: installation, easy demolition, covers an area of small, can be installed in the room, outside;
2), energy efficient: just consume a small amount of electricity, you can absorb a lot of heat in the air, power consumption is only 1 / 3-1 / 4 heater; with coal, oil, gas drying equipment phase Than can save about 75% of the operating costs. 1 kWh is equal to 4 kWh.
3), environmental pollution: no combustion and emissions, is a sustainable development of environmentally friendly products.
4), safe and reliable operation: the whole system is running without traditional dryers (fuel, gas or electric heating) may exist in the flammable, explosive, poisoning, short circuit and other hazards, is an absolutely safe and reliable closed system The The same time as the above-
5), long service life, low maintenance costs: mature technology, stable performance, reliable, long life; safe and reliable operation, automatic free manual operation, intelligent control. The same time as the above.
6), comfortable and convenient, automation, high degree of intelligence: the use of automatic temperature control device, 24 hours continuous drying operation.
7), for a wide range, not affected by climate: can be widely applied to food, chemical, pharmaceutical, paper, leather, wood, agricultural and sideline products processing industries such as heating and drying operations
Drying material:
Chinese herbal medicines such as honeysuckle, Momordica grosvenori, pseudo-ginseng, Atractylodes, ginseng, medlar, Cordyceps sinensis, Coptis chinensis, and Eucommia ulmoides;
Spices and ingredients such as fermented blank bean, pepper, cumin, ginger, dehydrated onion & garlic, star anise, fennel, and chili;
Food such as cured meat, casing, seafood, aquatic products, fungus, yuba, noodles, vermicelli, dried fruit, betel nut, vegetables, fungus, melon seeds, peanuts, dried sweet potatoes, Cherry tomato, Vileplume, preserved fruit, seeds, cereals;
Tobacco leaves, tribute, fireworks, baking varnish, pasture, electronic products, textile dyestuff, wood, grain cotton, bedding & clothing, leather goods, toys, Glass fiber reinforced polyester products, hatching chickens & ducks, etc.
Industrial Dryer and Dehumidifier Air source Heat Pump 15-65kw high COP
Parameter:
Model No. | JT-125ZTX | JT-150ZTX | JT-250ZTX | JT-300ZTX | JT-500ZTX |
Horse power (HP) | 5 | 6 | 10 | 12 | 20 |
Oven temp.(℃) | 10-80 | 10~80 | 10~80 | 10~80 | 10~80 |
Dry humidity(%) | 5%-99% | 5%-99% | 5%-99% | 5%-99% | 5%-99% |
Rated Heating capacity(kW) | 15.8 | 20 | 32 | 40 | 65 |
Rated heating power input(kW) | 5.6 | 6.8 | 11.2 | 13.6 | 22.5 |
COP | 2.82 | 2.94 | 2.86 | 2.94 | 2.89 |
Rated heating current input | 12A | 15A | 24A | 30A | 43A |
Rated Cooling capacity(kW) | 12.5 | 16 | 25 | 32 | 50 |
Rated cooling power input(kW) | 5.2 | 6.6 | 11 | 13 | 22 |
EER | 2.40 | 2.42 | 2.27 | 2.46 | 2.27 |
Rated cooling current input | 11.6A | 13.8A | 23A | 29A | 42A |
Maximum power input(kW) | 7.28 | 8.84 | 14.56 | 17.68 | 29.25 |
Maximum current input | 15.6A | 19.5A | 31A | 39A | 56A |
Auxiliary heater power input | 6kW | 6kW | 9kW | 9kW | 18KW |
Auxiliary heater current | 9A | 9A | 13.6A | 13.6A | 27.4A |
Dryer capacity(kg/H) | 12.5 | 15 | 25 | 30 | 50 |
Refrigerant | R134a | R134a | R134a | R134a | R134a |
Power supply | 380V/3Ph/50,60Hz | 380V/3Ph/50,60Hz | 380V/3Ph/50,60Hz | 380V/3Ph/50,60Hz | 380V/3Ph/50,60Hz |
Suction/discharge max pressure | 0.7 / 4.0MPa | 0.7 / 4.0MPa | 0.7 / 4.0MPa | 0.7 / 4.0MPa | 0.7 / 4.0MPa |
Dehumidify capacity(L/H) | 12.5 | 15 | 25 | 30 | 50 |
Anti-electric shock class | Class I | Class I | Class I | Class I | 1 级 |
Unit protection class | IPX4 | IPX4 | IPX4 | IPX4 | IPX4 |
Nosie | ≤68dB(A) | ≤68dB(A) | ≤72dB(A) | ≤72dB(A) | ≤73dB(A) |
Working temp. | -10-40℃ | -10-40℃ | -10-40℃ | -10-40℃ | -10-40℃ |
Net weight | 265kg | 295kg | 355kg | 385kg | 420kg |
Product dimension | 1440x1300x1200=2.25m³ | 1440x1300x1200=2.25m³ | 1600x1300x1480=3.08m³ | 1600x1300x1480=3.08m³ | 1600x1300x1480=3.08m³ |
Test condition: Heating capacity: Outside dry bolb temp. 20℃, oven temp. 70℃
Dehumidify: Drying room temp. 35℃, drying room temp. 35℃, humidity 60%
Heat pump dryer and dehumidifying principle:
1, The heating principle: Heat pump transfer the heat into the drying room through the fan. In the drying process, the air inlet has a temperature detector, and according to the inlet air temperature automatically control the heat pump’s work. When the drying room temperature is lower than the set temperature (such as: 60 ℃), the heat pump starts to work, increases the supply of high temperature hot air to meet the needs of dry materials. When the drying room temperature reaches the set temperature (such as: 70℃), the heat pump stops working, usually earlier stage is heating time, late period is heat preservation time, drying room temperature requirements lower, the insulation time keeps longer , so it’s energy saving.
2, The dehumidifying principle: dehumidifying system is automatically controlled by the system. When the temperature is set to 60 ℃, humidity is set to 80%, the dehumidifying fan opens automatically, the vapor water discharge to atmosphere. When the temperature and humidity are lower than the set value, the dehumidifying fan shuts down automatically, and stops dehumidify to achieve the purpose of dehumidifying.
AIM Heat pumps have several advantages compare to other water heater:
1. Save money. Heat pump is a high efficiency water heater, to supply 4kw energy; it just consumes 1kw electric power. So compare to electric heater, it can save 3kw electric energy. Save energy means save money.
2. Environment friendly. Heat pump only need electric, so it doesn't burn fuels, doesn't exhaust pollution of air and water. It’s very clean.
3. Safe. Compare to common electric water heater, water and electricity is segregated in heat pump, avoid people getting an electric shock when bathing. Make sure humans' safe as Multiple-protections.
4. Free installation: Heat pumps can be installed in the garden, on the balcony, or on the housetop, or any place you like.
5. No affected by weather: Heat pump can work in the day and night. You can get hot water at any time.
6. Government support: Now, more and more countries government support heat pump users and give them subsidy.
AIM is a professional heat pump manufacturer based in China. With over decades of experience in the HVAC industry, AIM has become one of the leading brands of quality heating, cooling & hot water system. Our main products include heat pump, air conditioner & water tank equipment.
Guangdong AIM Energy Saving Technology Co., Ltd. was founded in 2000 and have well experience in energy-saving products, which is one of biggest Stainless steel heat pump in China. We have developed whole series of heating system equipment & energy-saving products with 10 series and more than 50 kinds of products.
Our products range is as below:
Air to water heat pump.
Water to water heat pump.
Water to air heat pump.
Commercial air conditioner.
Fan coil units.
Besides Chinese market, export business is our main business. So most of our products are coming with international standard, some of our products have obtained international certificate, such as CE, RoHS, SAA certificate and ERP label etc, and our factory execute ISO9001:2008 strictly. We are always insists on the principle of quality first, customer first, and focus on high-quality, competitive cost & fastest services. So far, our products have entered over 50 countries and regions with either brand name AIM or OEM brand.
We are always on the look-out to build strategic partnerships in overseas markets and welcome opportunities where we can work in tandem with you and succeed together. OEM & ODM inquires are welcome.
Looking towards the future, AIM will build a fresh and quiet living environment and comfortable life for you.